DIY Solid Wood Wall Frame 🖼 50% OFF NOW! 🖼
Follow The Instructions Below
🖼 Step 1: Take inventory.
Each Paint With Diamonds Wooden Frame Stretcher Bar Kit comes with:
- 4 x Wooden Stretcher Bars
- 4 x 'U' Nails
- 4 x Corner Wedges
- 1 x Traceless Hook Kit
🖼 Step 2: Lay your canvas out face down on a smooth, clean, flat surface. Layout each Stretcher Bar along the edges of the canvas.
Make sure each stretcher bar is flush up against the edge of the painting! Otherwise, your final product might not come together well.
Also, take note that the skinny (narrow) half of each stretcher bar should be facing inward.
🖼 Step 3: Use tape (not included) to secure the bars in place on the canvas.
🖼 Step 4: Remove the double-sided adhesive tape on each stretcher-bar. Then curl up all 4 sides into each other. Squeeze the corners to secure all of the stretcher bars in place.
🖼 Step 5: Insert each 'U' Nail into the pre-drilled holes on each Stretcher Bar. Once all 4 'U' Nails are inserted by hand, use a hammer to secure the nails to the Stretcher Bars.
🖼 Step 6: Insert the Corner Wedges into the grooves on the side of each Stretcher Bar. Use a hammer to secure the Corner Wedges into place.